SAFETY GUIDELINES
HOLZMANN Maschinen Austria
www.holzmann-maschinen.at
Seite 14
Elektroden Inverter Schweissanlage / electrode inverter welding unit
EISA162 / EISA200
11.2
Working conditions
The machine is intended for the work under the following conditions :
Relative Humidity
at 40 ° C max. 50 %
at 20 ° C max. 90 %
Operating temperature
of +5 ° С to +40 ° С
min. Illumination
500 Lux
The machine is not intended for outdoor use.
The machine is not intended for use in an environment that is charged electromagnetic
( "electrosmog ").
The machine is not designed for use in a work environment with gases , vapors , inter alia, de-
termines which attack the isolation of electronic components corrode or could destroy .
The machine is not designed for operation in explosion- hazardous conditions.
The machine is not intended for use in a work environment where vibrations occur regularly , as
these are the efficiency, accuracy and working life of the machine reduced.
The handling of flammable and explosive materials is prohibited ( eg pure aluminum, magnesium,
etc. ) .
11.3
Incorrect usage
Operation of the machine that doesn’t agree with this manual is forbidden!
Operation without the safety devices is not allowed.
You mustn’t remove the safety devices!
Incorrect is the usage for materials which aren’t mentioned in this manual.
Changes of the machine’s construction are forbidden.
For another usage and resulting damages or injuries HOLZMANN MASCHINEN
doesn’t assume any responsibility or guarantees.
11.4
Safety instructions
Warning labels and/or other labels on the machine must be replaced when they were removed.
Do not operate the machine at insufficient lighting conditions.
Do not operate the machine outdoors.
Do not operate the machine when you are tired, when your concentrati-
on is impaired, and/ or under the influence of drugs, medication or al-
cohol.
The machine shall be used only by trained persons.
Non authorized persons, especially children, shall be kept away from
the work area.
