TROUBLE SHOOTING
HOLZMANN MASCHINEN Austria www.holzmann-maschinen.at
Seite 24
ROHRSCHLEIFGERÄT / TUBE BELT SANDER RSG 760
15.3
Disposal
Do not dispose the machine in residual waste. Contact your local authorities
for information regarding the available disposal options. When you buy at your
local dealer for a replacement unit, the latter is obliged to exchange your old.
16
TROUBLE SHOOTING
Disconnect the machine from the power supply prior to any checks performed
at the machine itself!
Trouble
Possible cause
Solution
Machine stops or will not start
ON/OFF-switch damaged
Saw unplugged
Overload tripped
Fuse blown or circuit breaker
tripped
Cord damaged
Check the switch
Check all power connections
Allow motor to cool and reset
by pushing off switch
Change fuse or reset circuit
breake
Change cable
Machine slows down during
working
Exerting too much pressure to
the sanding abrasive
Exert less pressure on the work
piece
Bad grinding results
Abrasive too coarse-grained
Use less coarsed abrasive
To rapid wear of
Abrasive too fine-grained
Use more coarsed abrasive
Sanding belt runs out of
sanding belt bed
Sanding belt is mounted wrong
Mount the sanding belt
centrally
Work piece burns during the
working process
Abrasive is dirty from oil
Too much pressure
Change abrasive
Reduce pressure
MANY MALFUNCTIONS AND DEFECTS CAN BE AVOIDED BY LETTING THE MACHINE BE
CONNECTED TO YOUR POWER SUPPLY BY A CERTIFIED ELECTRICIAN
Summary of Contents for RSG 760
Page 32: ......
