Introduction
ADH-Series | Version 1.05
3
1 Introduction
You have made an excellent choice in purchasing a
HOLZSTAR Planer-Thicknesser.
Carefully read the operating instructions prior to commission-
ing.
They describe correct commissioning, intended use
and safe as well as efficient operation and maintenance
of the Planer-Thicknesser.
The operating instructions form part of the Planer-
Thicknesser. Always keep them at the Planer-Thicknes-
ser´s location of use. Please also observe the local
accident prevention regulations and general safety
regulations for the use of the Planer-Thicknesser.
1.1 Copyright
The contents of these operating instructions are pro-
tected by copyright. Their use is permitted within the
context of using the Planer-Thicknesser. Any further use
shall not be permitted without written consent by the ma-
nufacturer.
To protect our products, we register our rights to our
brands, patents and designs where possible in each
individual case. We take strong action against any viola-
tion of our intellectual property.
1.2 Customer service
Please contact your specialist retailer if you have any
questions regarding your Planer-Thicknesser or require
any technical information. Your specialist retailer will be
happy to support you with specialist advice and infor-
mation.
Germany:
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26
D-96103 Hallstadt / Germany
Repair service:
Fax:
0951 96555-111
E-Mail:
service@stuermer-maschinen.de
Internet:
www.holzstar.de
Spare parts orders:
Fax:
0951 96555-119
E-Mail:
ersatzteile@stuermer-maschinen.de
Please submit any information and experiences you
make during application of the machine as these may
be valuable for product improvements.
1.3 Disclaimer
All data in this operation manual has been compiled on
the basis of the state-of-the-art, valid standards and
guidelines as well as our many years of expertise and
experience.
The manufacturer shall not be liable for damage in the
following cases:
- Failure to comply with the operation manual,
- Unintended use
- Deployment of untrained staff
- Conversions at one's own responsibility
- Technical modifications
- Use of unauthorised spare parts
The actual scope of delivery may deviate from the
descriptions and illustrations in this document as a re-
sult of special variants, optional extras or recent,
technical modifications. The obligations defined in the
supply contract shall apply in addition to the general
terms and conditions and the manufacturer's general
terms and conditions as well as the statutory regulations
valid at the time of the conclusion of the contract.
2 Safety
This section provides an overview of all important safety
packages for personal protection as well as safe and
reliable operation. The individual sections contain
additional, task-specific safety information.
2.1 Legend of symbols
Safety instructions
Safety instructions in this operation manual have been
highlighted with symbols. Safety instructions are indica-
ted by signal terms that express the degree of risk
involved.
WARNING!
This combination of symbol and signal term indica-
tes a potentially dangerous situation which may
cause death or serious injury if not averted.
DANGER!
This combination of symbol and signal term indica-
tes a immediate dangerous situation which may
cause death or serious injury if not averted.
Summary of Contents for ADH 200
Page 1: ...Instruction manual ADH S ERIES Planer Thicknesser ADH 200 ADH 250 ADH 305 ADH 250 ADH 200 ...
Page 19: ...Spare parts ADH Series Version 1 05 19 Fig 18 Spare parts drawing ADH 250 ...
Page 20: ...20 ADH Series Version 1 05 Spare parts Fig 19 Spare parts drawing ADH 305 ...
Page 22: ...www holzstar de ...
