Intended Use
DB-Series | Version 3.09
7
3
Intended Use
The lathe DB-Series is used exclusively for turning wood
or wood-like materials. The maximum turning length and
the maximum diameter of the workpiece to be machined
(see chapter "Technical data") must be observed. It is
suitable for private use, not for industrial use. Intended
use also includes compliance with all information in
these instructions. Any use beyond the intended use or
any other use is considered misuse.
Stürmer Maschinen GmbH assumes no liability for con-
structive and technical changes to the lathe.
Claims of any kind due to damage due to improper use
are excluded.
3.1 Residual risks
Even if all safety regulations are observed and the ma-
chine is used in accordance with the regulations, there
are still residual risks, which are listed below:
- Injuries caused by flying work pieces or work piece
parts
- Fire hazard with insufficient ventilation of the motor
- Danger of electric shock, if the wiring is not correct.
- Danger from noise and dust (wear ear protection
and use a suitable extraction system).
4
Technical Data
WARNING!
Danger in case of misuse!
Misuse of the lathe can lead to dangerous situations.
- Only operate the lathe in the power range specified
in the technical data.
- Never bypass or disable the safety devices.
- Never work on materials other than those specified
for the intended use.
- Only operate the lathe in a technically perfect condi-
tion.
- Never machine several workpieces at the same
time.
ATTENTION!
Certain types of wood and wood products produce
harmful dust emissions when processed. Therefore,
only use your machine in a well-ventilated room and
preferably use an extraction unit.
ATTENTION!
The machine may only be operated in a technically
perfect condition. Any faults must be rectified imme-
diately.
Unauthorised modifications to the machine or impro-
per use of the machine as well as disregard of the
safety regulations or the operating instructions
exclude the manufacturer's liability for any resulting
damage to persons or objects and invalidate the war-
ranty claim!
WARNING!
It should be pointed out that every machine has resi-
dual risks. All operations (even the simplest ones)
must be carried out with great care. Safe working
depends on you!
Model
DB 900
Max. turning Ø
306 mm
Max. height
153 mm
Max. width
900 mm
Spindle head thread
M33 x 3.5
Morse cone
MK 2
Speeds
500 - 2000 min-¹
Speed stages
Mechanical variable,
10 stages
Motor output
550 W
Electrical connection
230 V / 50 Hz
Dimensions L x W x H
1380 x 330 x 1175 mm
Weight
80 kg
Model
DB 1100
Max. turning Ø
358 mm
Max. height
179 mm
Max. width
1100 mm
Spindle head thread
M33 x 3.5
Morse cone
MK 2
Speeds
500 - 2000 min-¹
Speed stages
Mechanical variable,
10 stages
Motor output
750 W
Electrical connection
230 V / 50 Hz
Dimensions L x W x H
1620 x 340 x 1215 mm
Weight
92 kg
