2
DH-Series | Version 1.01
Imprint
Product identification
Planer
Artikelnummer
DH 330
5904330
Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26
D-96103 Hallstadt
Fax:
0049 (0) 951 96555-55
E-Mail: info@holzstar.de
URL: www.holzstar.de
Indication regarding the operating instructions
Original instructions
Edition:
16.05.2018
Version: 1.01
Language: English
Author:
SN
Indication regarding the copyright
Copyright © 2018 Stürmer Maschinen GmbH, Hallstadt,
Germany.
The contents of these operating instructions are the sole
property of the company Stürmer Maschinen GmbH.
Passing on as well as copying of this document, the use
and distribution of its content are prohibited if not expli-
citly permitted. Contraventions are liable to compensa-
tion.
Subject to technical modifications and error.
Content
Imprint .....................................................................2
Content....................................................................2
1 Introduction .............................................................3
1.1 Copyright ............................................................ 3
1.2 Customer service................................................ 3
1.3 Disclaimer........................................................... 3
2 Safety........................................................................3
2.1 Legend of symbols............................................. 3
2.2 Operator responsibility ....................................... 4
2.3 Operating staff qualification ............................... 4
2.4 Personal protective equipment........................... 5
2.5 Safety labels on the planer ................................. 5
2.6 For your own safety ............................................ 6
2.7 General safety instruction................................... 7
2.8 Residual risks ..................................................... 8
3 Intended Use............................................................8
4 Technical Data .........................................................9
4.1 Table................................................................... 9
4.2 Type plate........................................................... 9
5 Transport, packaging, storage...............................9
5.1 Delivery and transport ........................................ 9
5.2 Packaging........................................................... 9
5.3 Lagerung ............................................................ 9
6 Description of device ............................................10
7 Setting up and connection ...................................10
7.1 Requirements for the place of operation .......... 10
7.2 Setting up of the Planer .................................... 11
7.3 Electrical connection ........................................ 13
8 Operation ...............................................................14
8.1 Thickness planing of workpiece....................... 15
9 Care, maintenance and repair ..............................16
9.1 Care after work ................................................. 16
9.2 Inspection and replacement of brushes........... 17
9.3 Maintenance..................................................... 17
9.4 Knife replacement ............................................ 17
9.5 Servicing........................................................... 18
10 Troubleshooting .................................................19
11 Disposal, recycling of used devices..................20
11.1 Decommissioning........................................... 20
11.2 Disposal of electrical equipment .................... 20
11.3 Disposal of lubricants ..................................... 20
12 Spare parts...........................................................20
12.1 Ordering spare parts ...................................... 20
12.2 Spare parts drawing ....................................... 21
13 Electrical circuit diagram....................................22
14 EC Declaration of Conformity ............................23
