Intended Use
KGZ 305 E | Version 1.09 | EN
5
If safety labels on the machine are damaged or missing,
this can cause errors, personal injury and material da-
mage. The safety symbols attached to the machine must
not be removed. Damaged safety symbols must be re-
placed immediately.
As soon as the signs are not clearly visible and compre-
hensible at first glance, the machine must be stopped
until new signs have been attached.
3 Intended Use
The chop- and mitre saw KGZ 305 E is used for the pro-
duction of cross sections, mitre cuts, double mitre cuts
and inclined cuts of boards and strips. The production of
grooves is also possible. The processing of solid wood,
chipboard, panels and profiles made of plastic materials
and aluminium is possible. In compliance with the safety
instructions, the operating conditions for the saw blade
used must be observed. The saw is suitable for both pri-
vate and commercial use. Intended use also includes
compliance with all the information in these instructions.
Any use that goes beyond the intended use or any other
use is considered misuse..
For structural and technical changes to the chop- and
mitre saw the company Stürmer Maschinen GmbH assu-
mes no liability Claims of any kind due to damage due to
improper use are excluded
4 Technical Data
4.1 Type plate KGZ 305 E
Fig. 2: Type plate
WARNING!
Danger in case of misuse!!
Misuse of the chop- and mitre saw can lead to dan-
gerous situations.
- Never saw more than one piece of wood on top of
each other.
KGZ 305 E
Bevel angle range
(Turntable)
0 – 45° (left/right)
Swing range (saw head)
0 – 45° (left/right)
Sound pressure level
[db(A)]
88,4 dB(A)
Sound power level [db (A)]
101,4 dB(A)
Electrical connection
230 V / 50 Hz
Motor output
2000 W
Dimensions [LxWxH]
835x570x790 mm
Insulation class
I
Length of connecting cable
approx. 2 m
Laser category
2
Output power of the laser
< 1 mW
Blade highest speed
4500 1/min.
Saw blade size
305 x 30 x 3,2 mm
Saw blade boring
30 mm
Weight
23 kg
