2
SAA 901 | Version 1.01
Imprint
Product identification
Chip Extraction Unit
Item number
SAA 901
5923901
Manufacturer
Stuermer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26
D-96103 Hallstadt
Germany
Fax:
0049 (0) 951 96555 - 55
E-Mail: info@holzstar.de
Internet: www.holzstar.de
Information about the operating instructions
Original operating instructions
Published: 26.10.2017
Version: 1.01
Language: English
Author:
FL
Copyright information
Copyright © 2017 Stürmer Maschinen GmbH, Hallstadt,
Germany.
Stürmer Maschinen GmbH is the sole owner of the
content of these operating instructions.
Forwarding and reproduction of this document as well
as use and notification of its content is not permitted
without explicit consent. Infringements will lead to
claims for damages.
Subject to technical changes and errors.
Contents
1 Introduction ........................................................... 3
1.1 Copyright ........................................................... 3
1.2 Customer service............................................... 3
1.3 Disclaimer.......................................................... 3
2 Safety...................................................................... 3
2.1 Legend of symbols............................................ 3
2.2 Operator responsibility ...................................... 4
2.3 Operating staff qualification .............................. 4
2.4 Personal protective equipment.......................... 5
2.5 Safety labels on the Chip Extraction Unit .......... 5
2.6 General safety aspects...................................... 5
2.7 Safety aspects in dealing with electricity .......... 6
2.8 Safety aspects in dealing with application of tools. 6
2.9 Safety to operation............................................. 7
2.10 Safety aspects on servicing and maintenance . 7
2.11 Security check................................................. 7
3 Designated use...................................................... 8
4 Technical Data ....................................................... 8
4.1 Table ................................................................ 8
4.2 Type plate.......................................................... 8
5 Transport, packaging, storage............................. 8
5.1 Delivery and transport ....................................... 8
5.2 Packaging.......................................................... 8
5.3 Bearing .............................................................. 8
6 Machine description.............................................. 9
6.1 Illustration .......................................................... 9
6.2 Scope of supply................................................. 9
6.3 Optional accessories: ....................................... 9
7 Installation and connection.................................. 9
7.1 Requirements to the installation location........... 9
7.2 Set up the Chip Extraction Unit ......................... 10
7.3 Initial operation the Chip Extraction Unit ........... 10
7.4 Electrical connection ......................................... 10
8 Installation of the Chip Extraction Unit ............... 11
9 Operation ............................................................... 13
9.1 Turn on............................................................... 13
9.2 Turn off............................................................... 13
9.3 Emptying the chip-collecting bag ..................... 13
9.4 Transport of the Exhaust system ....................... 13
10 Maintenance and Service ................................... 13
11 Malfunctions, potential causes and remedies .... 14
12 Disposal, reusing used machines ..................... 14
12.1 Decommissioning............................................ 14
12.2 Disposal of electrical equipment ..................... 15
12.3 Disposing of lubricants.................................... 15
12.4 Disposal by municipal collection point............ 15
13 Spare Parts .......................................................... 15
13.1 Spare parts orders........................................... 15
13.2 Spare parts drawing ........................................ 16
14 EU Declaration of Conformity ............................ 17