Holztech SD320
WWW.HOLZTECH.COM
2.0 SAFETY PRECAUTIONS
3.0
Never operate this machine without the here prescribed safety and devices.
•
Carefully observe the operation instructions.
•
During maintenance, reparation and inspection work switch off from mains.
•
Always check safety devices before usage.
•
Safety precautions are as per operation manual.
•
Operation with gloves is not allowed.
•
After operation carefully clean from shavings and dust.
•
Always keep the working table clean.
•
Never clean machine with water stream either switched on or off.
•
Before commencing operation remove from machine and working table all tools not
needed.
•
Watch out for the machine to be in null position before mains are turned on.
•
Prime to operation provide for professional electric wiring.
•
Use this machine and tools for applications prescribed in this manual only.
•
Maximum size of workpiece is prescribed in art. 7.0 of this manual.
•
Never operate this machine in damp places, do not expose to rain or marginal
temperatures.
•
Never leave the machine in operation without attention.
•
Do not operate with wide clothes, long hair, rings, watches, etc.
•
Tapered pieces are to be fed always with high feed.
•
Operate the machine with protection shields installed.
•
Always use protection glasses, mask or other prescribed safety devices.
•
Keep away from children and observe that no children have access in factory.
•
Youngsters under 16 must operate under authorized supervisor.
•
When machine works under heavy duty shavings retrieving device should be used.
•
Before operation workpleces are to be expected for defects, such as knots, nails, etc.
•
Always replace cutting knives in set and never use knives less than 30 mm wide.
•
Use one side ground knives only.
•
When installing machine provide for lights free of screens and stroboscope effects.
•
Machine is to be operated by authorized personnel well acquainted with this type of
equipment and posses all skills for the purpose.
•
Provide the workplace with respective conununications.
Attention!
Non observation of the safety precautions or non prescribed operation may
provide for great danger for operator.
