HOMCOM 800-104, Assembly & Instruction Manual

6

HELPFUL REMINDERS

Jar cover should always be secure while the unit is in opera on. Always use the blender on a 
clean, sturdy and dry surface.
Insert the measuring cup into the cover.
 Once the cover is in posi on, addi onal ingredients can be added during blending by simply 
removing  the  measuring  cup  insert,  adding  ingredients,  and  replacing  it,  turning  it  to 
secure.
  Do  not  place  jar  on  base  while  motor  is  running  or  remove  jar  before  the  blender  has 
stopped running.
 Do not a empt to blend boiling liquids
  When  blending,  place  liquid  ingredients  into  the  jar  first,  followed  by  the  so est 
ingredients. Ice or frozen fruit should be placed in the jar last.
  Use  a  plas c  spatula  as  needed,  only  when  the  blender  is  turned  off.  Never  use  metal 
utensils, as damage may occur to the jar or blade.
 Blending hard ingredients and spices may cause some clouding to appear on the inside of 
the jar, but will not affect blender performance.
 Use Ice crush and Cleaning program for maximum power to break up hard ingredients.
 Do not exceed the MAX FILL LINE when adding food or liquid to the blending jar
  Make  sure  the  jar  is  completely  dry  when  chopping  ice,  fresh  herbs,  garlic,  onion,  zest, 
breadcrumbs or nuts and spices.
 Do not store food or liquids in your jar.
 Be careful not to over process foods.
 Do not use any utensil inside the jar with the motor on.
 Unplug blender before reaching into the jar.
 Never use carbonated liquids in a jar. Using carbonated liquids in the blender may result in 
Injury

BLENDER CLEANING AND MAINTENANCE

Always  unplug  the  blender  from  the  electrical  outlet  before  cleaning.  Never  immerse 
blender base in water or other liquids.
1. Remove the jar from the blender base and remove the cover. The jar must be cleaned and 
dried a er each use or when the blender has not been used for an extended period of  me. 
We recommend using the automa c clean func on 
2. Wash the cover in warm, soapy water and rinse thoroughly.
3. The jar, blade assembly and cover assembly are all dishwasher safe.
4. To clean the blender base, wipe the exterior with a so  cloth or sponge dampened with 
cleaning solu on. Do not immerse the base in cleaning solu on or water. Wipe with a dry 
towel and be sure the base is completely dry before using.
5.  be  sure  that  the  blender  is  thoroughly  dry  and  properly  assembled  with  the  jar  pad  in 
place  before  opera ng.  An  authorized  service  representa ve  should  perform  any  other 
servicing.

EN