5
PressP
Day
EDIT
Time/On
Time/Off
OK
SET WEEKLY PROGRAM (ONLY by remote control)
.The current time must be set before any programming.
- Press to switch on the appliance.
1- Press
P
to enter into weekly program setting (the light
P
is on).
2- Press
DAY
to set the day of program activation (
d1, d2,d7
...),
3- Press
EDIT
to set the time period number (
P1, P2,...P6
),
4- Press
TIME/ON
to set the turn-on time (
00, 01, 02...,24
,)
Cannot set to minutes.
5- Press
TIME/OFF
toset theturn-offtime (
00, 01, 02,..., 24
)
Cannot set to minutes.
TIME/OFF
can not be less than
TIME/ON.
6- Press
+
or
-
to set the setting temperature of this time period.
7- Press
OK
to confirm the setting.
8- Repeat steps 3 to 7 to set another time period number for the same day.
Up to 6 programs are available for each day of the week.
9- Repeat steps 2 to 8 to set the others days of the week.
- Press
P
to active the weekly program (the light
P
is on), or to disable it (the light
P
is
off).
- After the above setting are completed and
P
program is work, press
DAY / EDIT
TIME/ON
and
TIME/OFF
to check the setting time of each dayand time period.
.When the turn-on time is same as the turn-off time, the appliance is instand by
mode.
f the setting temperature is not set, the default setting temperature is 23°C. If room
temperature higher 23°C, the appliance is not switch on.
.Theweeklyprogramiserasedwhenthe switch is off.
For example: Setting Monday 1st period working time 7:00 to 13:00
SET OPEN WINDOW (ONLY by remote control)
- Press to switch on the appliance, heating for a
moment
until stability.
- Press to active the open window mode (the light
is on).
- Press + or - to set the setting temperature for the
open windows function.
- Press to disable the open window mode (the light is off).
The appliance will resume to previous working mode.
During open window mode, if the room temperature drops from about 5°C to 10°C
in less than 10 minutes, the appliance will stop working and enter into stand by
mode. Press again to switch on the appliance.
.If open-window mode and weekly timer program simultaneously, if the appliance
turn off in weekly time, the appliance is not turned on. If it already turn on in weekly
timer, the appliance working as the setting temperature under open-window mode.
EN
