Step 3
Install the safety screws on the hinge (image4),
so the trampoline does not fold while in use .
Step 5
Attention:
There is a hole at center of the frame tube, before installing the bottom connect bar, please find the hole first (as shown
A).
Please find out bottom bar(TR06), To install on two legs, first remove rubber "feet" from these 2 legs, as shown B and C, Fix the
bottom BarTR06 with Two TR12 screws with help of Allen Key TR08, then recap rubber feet.
Step 6
Now connect the trampoline frame (TR01) and Bottom Bar (TR06) with the handle bar OUTER (TR05) by two long screws (TR09)
Step 7
Then install the Top bar (TR03) and inner bar (TR04) by screws, connect all parts as the picture shows.
Step 4
With the trampoline now open and still upside
down, install all 8 legs
(image 4)
A
B
C
TR12 x 2pcs
TR8 x 1pcs
TR06
TR02
TR9 x 2pcs
TR7 x 1pcs
Insert TR04 into TR05, fix with TR10 Screw, 3 positions
for your choice
TR10
TR4
TR5
TR3
TR4
TR8
TR11
-3-
