Common problems and treatment methods
case
probable cause
method
Can not start
The power plug is not plugged in.
Plug in the power plug
Product power switch is not
turned on
Turn on the power switch
The instantaneous current is too
large and the fuse is blown
Replace the fuse of the same
model
"Xiuxiu"or"Dada"
sounds when the
machine is working
This is the sound that the machine
makes when it is running, not the
machine failure. It is a normal
working sound.
No need to deal with
Remote
control
operation did not
respond
The remote control battery is
dead
Replacement battery
The remote control is too far from
the machine
The effective distance of infrared
sensing is 2.5 meters
Stop during use
Has reached the default working
time
Turn it on again after 10 minutes
Can't
operate
normally
May execute commands too
frequently
Turn off the power and restart
If it has not been removed after the above method, please contact the manufacturer or local
distributor, do not disassemble and repair it.
Product Parameters
t
Product name: Vibration Platform
Voltage: AC220V-240V
50Hz
Power: 200W
EN
-16-
