Suggestion:
•
ALIGN THE BELT:
Due to its use, the belt can move off center. If
the belt has moved to the left, start treadmill, and increase the
speed to 3MPH. Use the 6mm Wrench to turn the fixed left bolt
clockwise or turn the fixed right bolt counterclockwise. Do not tight-
en the belt too much in order to be able to walk. Repeat this proce-
dure until the belt is properly aligned.
•
ALIGN AND TIGHTEN THE BELT OF THE TREADMILL
< 3 hours/week
2 months
4 – 7 hours/week
1 month
> 8 hours/week
15 days
If deviate to the left, then adjust the screw on the
left side clockwise or the screw on the right side
anticlockwise.
If deviate to the right, then adjust the screw on the
right side clockwise or the screw on the left side
anticlockwise.
After the lubrication is completed, start the machine at 1km/h to let the running belt bring
silicon all over the board.
After running for a period of time, the treadmill must be configured with special cymene
silicone oil for lubrication.
13
Summary of Contents for A90-282V70
Page 11: ...V TREADMILL OPERATION MANUAL COMPUTER 11 ...
Page 16: ......
