background image

19-A correct lubrication of the treadmill with silicon oil or Teflon is REALLY IMPORT-
ANT. 

This lubrication must be performed regularly depending on each person, even before 

its first use. The lubrication must be carried out this way: disconnect the equipment of the 
electricity supply (in case you have one), pull up the tapestry from the side with one hand 
and spread the oil on the board. Please repeat this procedure from the other lateral side. 
Connect the equipment to the power supply (in case you have one) and turn the “on” 
button (red button) into the correct position (I), insert the security key and let the treadmill 
work for several minutes without any weight on it. Repeat this action on a regular basis. 

20-Two people will be needed in order to take the unit from the package. Otherwise, 
the damages caused in this moment won't be covered by the guarantee. 

21-Don't let any object fall into the grooves. 
22-If the unit works through a power cord: unplug always the power cord before cleaning it, 
after the workout and before performing any maintenance duty. 
23-This unit is designed for a domestic purpose and in an interior place, not for business 
environment or outside. 
24-Do a workout with stretches before and after the sessions, you will avoid injuries. 
25-Drink water before, during and after the workout. 
26-If you start feeling pain or dizziness while training: STOP IMMEDIATELY. 

27-You must preserve the original packaging with its protections, manual and com-
ponents during the guarantee period. 

28-The accessories can be different to the other models. 
29-This electronic product can't be thrown under any circumstances into the municipal 
rubbish bins. With the aim of preserving the environment, this product must be recycled 
according to the applicable law of your country. Please contact your town council to know 
more about this procedure. 
30-Should you need technical assistance or advise with the installation of pieces, You can 
get in touch with us .

YOU MUST KEEP THE PURCHASE RECEIPT IN ORDER TO HAVE ACCESS TO THIS 
SERVICE
KEEP THESE ADVISES FOR FUTURE REFERENCES

5

Summary of Contents for A90-282V70

















Reviews: