![background image](http://html1.mh-extra.com/html/homcom/a91-085/a91-085_product-instructions_2148045005.webp)
4
STEP 1
Take out the front support tube assembly (2), the front leg tube assembly (3), the outer hexagon bolt M10 * 55 (14) 1 piece
the Torx knob nut M10 (9) 1 piece, the hook foot foam component (4) 1 Pieces, front hook foot foam assembly (5) 1 piece.
As shown in Figure A, align the corresponding holes to install and tighten the related screws. The completed result is the
component in Figure A
INSTALLATION STEPS
2
4
3
14
9
5
Picture A
A PICTURE COMPONENTS