Scooter assembly
A- Take out the plastic stopper
Open the handlebar locking mechanism (11) and remove the plastic plug (13),
So that the handlebar (1) can be inserted therein.
B- Unfold the steering column
Pull the handle (5) of the folding mechanism and open the folding mechanism
(6). Then lift the steering column (9) until it reaches the vertical locking position
(you should hear a "clicking" engagement sound).
C-Positioning handlebars
Take the two handles (1) out of the rapid tightening lever for handlebars(2), and
Insert them into the left and right sides of the handlebar stem (7). For both han-
dlebars, you should hear "click" sound, indicating that the handlebar (1) Is in
place. Check whether the two spring buttons (12) are valid and visible.
D-Adjusting the handlebar height
Open the rapid tightening lever for the steering column (8) and adjust the height
of The handlebar stem (7) until you hear "click," indicating that it is in one of the
three Index positions, and then firmly fasten the rapid tightening lever for the
steering Column (8)
A
B
B
B
C
C
D
D
D
C
D
-8-
