Alternatively, seek out a qualified electrician.
44.
DO NOT
COVER!
Don’t
cover the unit with
anything during operation or a short time after it’s shut
down.
Assembling Process
Step 1: Connect the bottom tube with base by screwing them
together.
Step 2: Place the Decoration Cover onto the Bottom Tube.
Step 3: Feed the Power Cord through the base and the bottom
tube, and pull through around 2m of cable.
Step 4: Connect the 2 middle tubes with bottom pole by
screwing them together.
Step 5: Place the power cord plug through base, bottom tube,
middle tube and top tube. Connect the power cord plug to the
socket in the heater head.
