background image

Distributed By:

United States Stove Company

227 Industrial Park Rd

South Pittsburg, TN 37380

www.usstove.com

(800) 750-2723

1 year limited warranty - Customers in the Continental US

All components are warranted for a period of 1 year after date of purchase by the original owner against defects in materials and work-
manship under normal use. This warranty does not cover normal wear and weathering, assembly and \or maintenance or use in com-
mercial application if model is not designated as a commercial mode. At USSC’s sole discretion, products under warranty will be  repaired   
and \or replaced at no charge to the customer. Any returns sent back to USSC must be sent via prepaid freight and in the original retail 
packaging.

For warranty service contact USSC at the address, Phone number or web site listed in this owner’s manual. Be sure to have your sales 
receipt, date of purchase and catalogue/model number available when calling. All warranty service will be coordinated by the USSC 
service center.

This warranty is extended only to the original purchaser. Proof of purchase will be required before warranty service is rendered. The sales 
receipt is the only valid proof of purchase. This warranty only covers failures due to defects in materials or workmanship which occur 
during normal use. Failures and\or damage which result from accident, negligence, misuse, abuse, neglect, mishandling alteration or 
modification, failure to maintain, improper assembly or maintenance, service by unauthorized agency or use of unauthorized compo-
nents or damage that is attributable to acts of god are not covered.

***THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED ABOVE***

***PURCHASER ASSUMES ALL RISK IN THE ASSEMBLY AND OPERATION OF THIS UNIT***

***FAILURE TO FOLLOW WARNINGS AND OPERATIONAL INSTRUCTIONS CONTAINED IN THIS 

MANUAL CAN RESULT IN SEVERE PROPERTY DAMAGE AND\OR PERSONAL INJURY***

IN NO EVENT WILL USSC OR ITS DIRECTORS, OFFICERS OR AGENTS BE LIABLE TO THE PUR-
CHASER OR ANY THIRD PARTY, WHETHER IN CONTRACT, IN TORT, OR ON ANY OTHER BASIS , 
FOR ANY INDIRECT, SPECIAL, PUNITIVE, EXEMPLARY, CONSEQUENTIAL, OR INCIDENTAL LOSS, 
COST, OR DAMAGE ARISING OUT OF OR IN CONNECTION WITH THE SALE, MAINTENANCE, USE, 
OR INABILITY TO USE THE PRODUCT, EVEN IF USSC OR ITS DIRECTORS, OFFICERS OR AGENTS 
HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH LOSSES, COSTS OR DAMAGES, OR IF SUCH 
LOSSES, COSTS, OR DAMAGES ARE FORESEEABLE. IN NO EVENT WILL USSC, OR ITS OFFICER, DI-
RECTORS, OR AGENTS BE LIABLE FOR ANY DIRECT LOSSES, COSTS OR DAMAGES THAT EXCEED 
THE PURCHASE PRICE OF THE PRODUCT.

SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR 
CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO 
THE PURCHASER.;

This limited warranty gives you specific legal rights and you may also have other rights which vary from jurisdiction to jurisdiction. The 
provisions of the United Nations Convention on Contracts  for the sales of goods shall not apply to this limited warranty or the sale of 
products covered by this limited warranty.

***IMPORTANT NOTICE***

-DO NOT return to place of purchase-

For customer service  and warranty issues contact customer service

Summary of Contents for HCPHMSQ






















Reviews: