6
Assembly
STEP 1
Attach wheels (12) to the bottom plate (3) and
secure using 4 screws on each wheel. Please note the
wheels are facing downward and the bottom plate is
upside down as well.
STEP2
Turn assembly right side up and connect the LPG
cylinder fixed parts (21) to the bottom plate (.3).
Please note the wheels now should be facing upward.
STEP 3
Next, connect and fix the 4 lower support beams (4)
to the bottom plate (3) with screws (17).
STEP 4
Connect the control box (2) to the middle plate ( 1)
if it is not connected already. Then place the middle
plate between the 4 support beams (4) and attach
with screws (17).
STEP 5
Next, connect the plate cover (7) to the middle
plate using screws (17)
STEP 6
Connect the 4 upper supports (5) to the lower
supports (4) with screws {17).
Summary of Contents for HCPHSSQ
Page 11: ...11 Notes ...
Page 12: ...Notes ...
