ASSEMBLY
1 Assembling the Snowman Head
Align the two Halves of Head (A) then insert the connecting rods on
one half into the connecting holes on the other half and fasten them
together at the connection loops with Plastic Tie (I)
2 Assembling the Hat to the Snowman Head
Insert the connecting rods on the bottom of the Hat (G) into the
connecting holes on the top of the Head (A) and fasten them together
with Plastic Ties.
3 Assembling the Base Stand
Pull apart the Base Stand (F) legs so they are X-shaped laying on a flat
surface. Align the holes on the base Stand. Secure the Base Stand with
the Large Twist Screws (H) in the hole on the outside of the metal tab.
4 Assembling the Bottom Section to the Base Stand
Insert the Bottom Section of the Tree (D) into the pole of the Base Stand
(F) and secure with the Large Twist Screws (H).
5 Assembling the Middle Section to the Bottom Section
of the Tree
Insert the Middle Section (C) pole into the pole on the Bottom Section
(D) of the Tree.
6 Assembling the Top Section to the Middle Section of the
Tree
Insert the Top Section (B) pole into the pole on the Middle Section (C) of
the Tree.
7 Assembling the Snowman Head to the Tree
Assemble the Snowman Head (A) on the top of the Tree by placing the
connecting pole on the bottom of the Head into the pole on the top of
the Tree.
8 Wrap the Scarf on Neck and slightly form the branches
Wrap the Scarf (E) on the Snowman's neck and slightly form the branches
to your desired look.
