User Servicing Instructions
Replace the fuse.
a)
Grasp plug and remove from the receptacle or other outlet device.
Do not unplug by pulling on cord.
b)
Open fuse cover. Slide open fuse access cover
on top of attachment plug towards blades.
c)
Remove fuse carefully.
d)
Risk of fire. Replace fuse only with 3 Amp, 125 Volt fuse (provided
with product).
e)
Close fuse cover. Slide closed the fuse access cover on top of
attachment plug.
f)
Risk of fire. Do not replace attachment plug. Contains a safety
device (fuse) that should not be removed. Discard product if the
attachment plug is damaged.
Replace the lamp.
1.
Grasp plug and remove from its power source.
2.
Unlock the lock on the bulb socket.
3.
Pull bulb AND plastic base straight out of socket. Do not twist bulbs
while you are removing them.
4.
Replace burned-out bulb with 3 V, 20 mA LED bulb ONLY.
(Additional bulbs are included for your convenience.)
5.
Relock the lock on the bulb socket.
If the new bulb base does not fit in bulb holder, follow these steps:
Remove the cover.
Remove the base of the burned-out
bulb by straightening the bulb leads,
and gently pull bulb out.
Thread leads of new bulb through
holes in old base with one lead in each hole (always match the long
lead of new lamp to the hook of lamp base).
After bulb is fully inserted into base, bend each lead up so that the
leads will touch the contacts inside the bulb holder.
Insert the cover.
If connecting to a lighting string that does not have a Wattage (W)
rating {found on the tag within 6 inches of the plug} calculate the
wattage as follows: Multiply the current (0.04 A) which is on the
flag-type tag by 120.
For Example: Lighting string is rated 120V, 60Hz, 0.04 Amps.
0.04X120= 4.8 Watts
Add the wattage of each light string together for a total of 216 Watts or
less. (Do not exceed 216 Watts)
CAUTION
:
1.
To reduce the risk of overheating, replace burned-out lamps promptly.
Use 3.0 Volt, 20 mA LED lamps only.
2.
Risk of fire. This product does not contain lamp shunts, which allow the
product to operate if one lamp burns out. Replace lamps only with the
spare lamps provided with this product.
3.
To reduce the risk of fire and electric shock: a) Do not install on trees
having needles, leaves or branch coverings of metal or materials
which look like metal, and b) Do not mount or support strings in a
manner that can cut or damage wire insulation.
Care and Cleaning
Step 1. Remove all ornaments and decorations.
Step 2. Unplug the cord from the wall outlet and then disconnect each
section of the tree.
Step 3. Gently lift the tree top straight up to remove from the bottom
section and fold all branches towards the pole.
Step 4. Carefully place all tree sections into a shipping box and tape it shut.
Step 5. Store your tree in a cool, dry place away from sunlight.
CAUTION! –
ALWAYS UNPLUG YOUR
TREE FROM ITS POWER SOURCE BEFORE
ATTEMPTING EITHER FUSE OR BULB
REPLACEMENT.
Troubleshooting
Problem
Solution
The tree
does not
light
Ensure that connectors of all tree sections are
connected into each other well. Make sure power
cord plug is securely inserted into a working
electrical outlet.
Check for blown fuses at the power cord plug. Replace
as needed with the replacement fuses provided.
Check for loose, broken, or missing bulbs and replace
as needed with the replacement bulbs provided.
If you are still experiencing problems with the tree
please call 1-877-527-0313 for instructions.
UL Model No. L2M3-30W-A-L05, L2M3-60W/2F-A-L05
