background image

Spare parts

If extra parts are needed, contact the Customer Service Team at 
1-877-527-0313 between the hours of 8 am and 5 pm EST, Monday 
through Friday.   

Turning on the tree

NOTE: If some bulbs do not light or flicker, search for any loose
plugs and/or provided in order to maintain the performance and
life expectancy of your tree.
Step 1.  Connect the light strings of the tree together and  plug the                
                adapter into a wall outlet.  

Operation

Christmas Tree

Model: 21PG90240

          Sku # 

1006 150 924

Care and Cleaning

1. Remove all ornaments and decorations. 
2. Unplug the adapter from the wall and then unplug each section     
    of the tree.      
3. Gently lift the tree top straight up to remove from the center 
    section and fold all branches towards the pole.  
4. Repeat this step for the center and bottom tree sections.
5. Carefully place all tree sections into a shipping box and tape 
    it shut. 
6. Store your tree in a cool, dry place away from sunlight.    

CAUTION:

 

Use only power adapter that was provided 

with this product. Using a different power adapter will damage the 
lights and cause fire, electrical shock hazard.

Step 1. Remove the protective caps from the tree bottom and insert 
                the pole into the tree stand. 
Step 2. Continue by inserting the upper tree section(s) to the lower             
                section(s) until inserting the tree top.
Step 3. Shape the branches to your preference by working from the               
               bottom to the top. When adjusting branches, ensure that all 
                wires are free of branch hinges.  
Step 4. Connect the light strings as per the red labels indicated in              
               attached photo and insert the adapter into the wall outlet.
Step 5. Shape the tree from the bottom to the top. Start with the 
                branches farthest from the pole – fan out in a star shape, 
               and continue until the entire tree is shaped.

Step 6. When finished shaping the branches, slightly upsweep all 
               branch tips for a uniform look. 

TM

Problem

Solution 

The tree does not 
light 

Ensure that all tree sections are plugged into 

each other and that the tree is plugged into 

the wall. 

Troubleshooting

Maintenance

Not Full?

Spread Branches

Run Extension Cord 

Tree Topper?

Other Issue?

1-877-527-0313

Light Section Out?

Connect Plug Between Sections

No Lights Working?

Check For Loose Connection

Branch Hanging Low?

Bend up

Reviews: