ASSEMBLY
1 Assembling the Left Candy Cane
Insert the connecting rods at the bottom of the Top Section (A) into the
connecting holes at the top of the Middle Section (B). Insert the connecting
rods at the bottom of the Middle Section (B) into the connecting holes at the
top of Lower Section (C) then fasten at the connecting loops with Plastic
Ties (K).
2 Assembling the Middle Section of the Right Candy Cane
to the Left Candy Cane
Insert the connecting rods of the Right Candy Cane's Middle Section (E) into
the matching connecting holes on the Left Candy Cane's Middle Section (B)
then fasten at the connecting loops with Plastic Ties (K) and secure them with
Bolt & Wingnuts (P) at the connecting loops.
3 Assembling the Right Candy Cane
Insert the connecting rods at the bottom of Top Section (D) into the
connecting holes at the top of Middle Section (E). Insert the connecting
rods at the top of Bottom Section (F) into the connecting holes at the
bottom of the Middle Section (E) then fasten at the connecting loops with
Plastic Ties (K).
4 Assembling the Support Bar
Stack the Upper Support Bar (H) onto the Lower Support Bar and secure with
the built in locking pin.
5 Assembling the Base Stand and Support Bar
Insert the connecting rods on the Base Stand (I) into the connecting holes
on the Bottom Sections of the Candy Canes (C,F) then fasten them with
Bolt & Wingnuts (P). Insert each hooked end of the Support Bar (H) into
the matching holes on the back of the left Candy Cane Middle Section (B)
and the Base Stand (I) then secure with the Cotter Pins (J).
6 Assembling the Bow
Insert the connecting rods on one half of Bow (G) into the connecting holes on
the other half of Bow (G) then fasten at the connecting loops with the Plastic
Ties (K).
7 Assembling the Bow to Candy Cane
Insert the connecting rods on Bow (G) into the matching connecting holes
on the front of Right Candy Cane Middle Section (E). Connect the electrical
from Bow to the electrical plug on the Bottom Section (F).
8 Assembling
the
Anchoring
Strings and Ground Stakes
Insert 4 Ground Stakes (N) over the metal Base Stand at the four corners then
into the ground firmly. Hook the plastic clipped end of each of Anchoring Strings
(O) onto the matching loops on the Top Sections of the Candy Canes (A,D).
Hook the free end of the Anchoring Strings (O) to the hook on the remaining 4
Ground Stakes (N) then firmly pull each Anchoring String with Ground Stake
out and away from the Candy Canes evenly and secure to the ground.
A
B
C
K
E
B
K
P
D
E
F
K
H
H
G
K
G
G
E
F
I
H
J
C
F
E
B
P
J
O
N
A
D
