background image

Christmas Tree

Model: TG66M3W89D14

Sku # 1003 151 930

Assembling the tree stand

Step 1. Choose a location near a wall outlet. 
Step 2. Unfold the legs of the tree stand and lay the stand on the floor. 
Step 3. Slide the locking disk of the tree stand down until it snaps 
               into place. 

Assembly

Step 1. Remove the protective caps from the tree bottom and insert 
                the pole into the tree stand. 
Step 2. Continue by inserting the upper tree section(s) to the lower             
                section(s) until inserting the tree top.
Step 3. Shape the branches to your preference by working from the               
               bottom to the top. When adjusting branches, ensure that all 
                wires are free of branch hinges.  
Step 4. Connect the light strings as per the color labels indicated in              
               attached photo and insert the adaptor into the wall outlet.
Step 5. Shape the tree from the bottom to the top. Start with the 
                branches farthest from the pole – fan out in a star shape, 
               and continue until the entire tree is shaped.

Step 6. When finished shaping the branches, slightly upsweep all 
               branch tips for a uniform look. 

Assembling the tree

Top view

Side view

TM

Safety Information

IMPORTANT SAFETY

INSTRUCTIONS

a.  

READ AND FOLLOW ALL 

    SAFETY INSTRUCTIONS.

When using electrical products, basic precautions should 

always be followed, including the following:

b.  Do not use seasonal products outdoors unless marked   

  suitable for indoor and outdoor use. When products are 

  used in outdoor applications, connect the product to a 

  Ground Fault Circuit Interrupting (GFCI) outlet. If one is 

   not provided, contact a qualified electrician for proper 

  installation.

c.   This seasonal product is not intended for permanent 

  installation or use.

d.  Do not mount or place the product near gas or electric    

  heaters, fireplaces, candles, or other similar sources of 

   heat.

e.  Do not secure the wiring of the product with staples or 

  nails, or place on sharp hooks or nails.

f.   Do not let lamps rest on the supply cord or on any wire.
g.  Unplug the product when leaving the house, when  

  retiring for the night, or if left unattended.

h.  This is an electric product and not a toy! To avoid risk of 

  fire, burns, personal injury and electric shock it should not  

  be played with or placed where small children can reach it.

i.   Do not use this product for other than its intended use.
j.   Do not hang ornaments or other objects from cord, wire, 

  or light string.

k.  Do not close doors or windows on the product or exten 

  sions cords as this may damage the wire insulation.

l.   Do not cover the product with cloth, paper, or any materi

  al that is not a part of the product when in use.

m. This product is equipped with push-in type lamps. Do not  

  twist lamps.

n.  Read and follow all instructions that are on the product

      or provide with the product.

o.  

SAVE THESE INSTRUCTIONS

Step 1.

 

Grasp the power adapter or power cord plug, and than 

                unplug from the power outlet. Do not pull the power cord.

LAMP REPLACEMENT

Step 2. Lift up lamp lock tab, then pull the 
                lamp and plastic lamp base straight 
                out of the lamp-holder.

Step 3.

 

Replace with a new spare lamp 

             provided with this product.

( Reference figure only)

USER SERVICING INSTRUCTIONS

Pre-Assembly

Package Contents

Part                        Description                                Quantity

A                             Tree top                                          1

B                     Tree center, Sticker 2                          1

C                    Tree center, Sticker 1                           1

D                            Tree stand                                       1

Reviews: