Christmas Tree
Model# TG70P3937S01
Sku # 1000 834 599
Operation
Turning on the tree
Maintenance
Care and Cleaning
Troubleshooting
Spare parts
Repairing Loose Hinges
Problem Solution
The tree does not
light
Ensure that all tree sections are
plugged into each other and that the
tree is plugged into the wall. If your
tree came with a foot pedal, step on
the On/Off button.
Check for blown fuses at the power
cord plug. Replace as needed with the
replacement fuses provided.
Check for loose, broken, or missing
bulbs and replace as needed with the
replacement bulbs provided.
NOTE: If some bulbs do not light or flicker, search for any
loose plugs and/or broken, loose, or missing bulbs. Replace
bulbs promptly with the replacement bulbs provided in
order to maintain the performance and life expectancy of
your tree.
Step 1.Connect the light strings of the tree together and
plug the power cord into a wall outlet.
Step 2.If the tree comes with a foot pedal, step on the
On/Off button.
This tree package includes hinge pins, washers, fuse and
bulbs for any replacement or repair that you need to
perform on your tree. If extra parts are needed, contact the
Customer Service Team at 1-877-527-0313 between the
hours of 8 am and 5 pm EST, Monday through Friday.
Step 1.Remove all ornaments and decorations.
Step 2.Unplug the cord from the wall and then unplug each
section of the tree.
Step 3.Gently lift the tree top straight up to remove from the
center section and fold all branches towards the pole.
Step 4.Repeat this step for the bottom tree section.
Step 5.Carefully place all tree sections into a shipping box
and tape it shut.
Step 6.Store your tree in a cool, dry place away from
sunlight.
Step 1.Place the branch into the slot of the bracket
Step 2.Insert a new hinge pin through the holes of the
bracket and secure with a washer.
User servicing instructions
FUSED LAMP REPLACEMENT
WARNING - Risk of fire:Do not replace the fuse lamp
contained in this set with any other type of lamp, use only
spare fuse lamps provided with this product. In case of a
burnt out FUSED lamp, the entire series of 50 lamps will be
out. To replace the fused lamp:
1. Grasp the plug and remove
from the receptacle or other
outlet device. Do not unplug
by pulling the cord.
2. Locate the fused lamp with
gray color lamp holder. Pull
the burnt fused lamp
and plastic lamp base straight out of the lamp holder.
3. Replace with a spare fused lamp. The fused lamp can be
distinguished by a gray lamp base and an additional clear
plastic cover.
4. Plug in the lights again.
Clear Plastic
Cover
Gray Lamp
Base
Gray Lamp
Holder
