Safety Information
IMPORTANT SAFETY
INSTRUCTIONS
a.
READ AND FOLLOW ALL
SAFETY INSTRUCTIONS.
When using electrical products, basic precautions should always
be followed, including the following:
b. Do not use seasonal products outdoors unless marked suitable
for indoor and outdoor use. When products are used in outdoor
applications, connect the product to a Ground Fault Circuit
Interrupting (GFCI) outlet. If one is not provided, contact a
qualified electrician for proper installation.
c. This seasonal product is not intended for permanent installa
tion or use.
d. Do not mount or place the product near gas or electric heaters,
fireplaces, candles, or other similar sources of heat.
e. Do not secure the wiring of the product with staples or nails, or
place on sharp hooks or nails.
f. Do not let lamps rest on the supply cord or on any wire.
g. Unplug the product when leaving the house, when retiring for
the night, or if left unattended.
h. This is an electric product and not a toy! To avoid risk of fire,
burns, personal injury and electric shock it should not be played
with or placed where small children can reach it.
i. Do not use this product for other than its intended use.
j. Do not hang ornaments or other objects from cord, wire, or
light string.
k. Do not close doors or windows on the product or exten sions
cords as this may damage the wire insulation.
l. Do not cover the product with cloth, paper, or any materi al
that is not a part of the product when in use.
m. This product is equipped with push-in type lamps. Do not twist
lamps.
n. Read and follow all instructions that are on the product or
provide with the product.
o.
SAVE THESE INSTRUCTIONS
Christmas Tree
Model: TG76M3W89D21
Sku # 1002 362 374
Step 1.
Grasp the power adapter or power cord plug,
and than unplug from the power outlet.
Do not pull the power cord.
LAMP REPLACEMENT
Step 2. Lift up lamp lock tab, then pull the
lamp and plastic lamp base
straight out of the lamp-holder.
Step 3.
Replace with a new spare lamp
provided with this product.
( Reference figure only)
USER SERVICING INSTRUCTIONS
Tree top
Section 2
Section 1
Do Not Tamper
Internal Parts
Open the
protective
cover
Do Not Tamper
Internal Parts
Open the
protective
cover
Control box
Adaptor
To Be Plugged
Into Wall
Outlet
Foot Pedal
on/off Switch
80S
80S
90S
90S
70S
70S
70S
Step 1
. Choose a location near a wall outlet.
Step 2
. Unfold the legs of the tree stand and lay the stand on the
floor.
Step 3
. Slide the locking disk of the tree stand down until it
snaps into place.
Assembling the tree
This tree assmebles with Quick Set® technology
---Set up and light up your tree in less than 10 minutes!
Step 1.
Remove the protective caps from the tree bottom and
insert the pole into the tree stand.
Step 2.
Continue by inserting the upper tree section(s) to the
lower section(s) until inserting the tree top.
Step 3.
Shape the branches to your preference by working from
the bottom to the top. When adjusting branches, ensure
that all wires are free of branch hinges.
Step 4.
Insert the adaptor into the wall outlet. All your lights
should now be lit.
Step 5.
Shape the tree from the bottom to the top. Start with
the branches farthest from the pole – fan out in a star
shape, and continue until the entire tree is shaped.
Step 6
. When finished shaping the branches, slightly upsweep all
branch tips for a uniform look.
Assembly
Assembling the tree stand
Pre-Assembly
Package Contents
Part
A
B
C
D
Description
Tree top
Tree center, Sticker 2
Tree center, Sticker 1
Tree stand
Quantity
1
1
1
1
Top view
Side view
TM
