background image

Christmas Tree

Model: TG90M5311L08

Sku # 1001 343 472

TM

CAUTION:

 

Use only power adapter that was provided 

with this product. Using a different power adapter will damage 

the lights and cause fire, electrical shock hazard.

Troubleshooting

Problem                        Solution

The tree does

not light

Ensure that all tree sections are plugged 

into each other and that the tree is 

plugged into the wall. If your tree came 

with a foot pedal, step on the On/Off 

button.

Check for loose, broken, or missing bulbs 

and replace as needed with the  

replacement bulbs provided

NOTE: If some bulbs do not light or flicker, search for any 

loose plugs and/or broken, loose, or missing bulbs. Replace 

bulbs promptly with the replacement bulbs provided in order 

to maintain the performance and life expectancy of your tree.
Step 1. Connect the light strings of the tree together and                  

               plug the adapter into a wall outlet.
Step 2. If the tree comes with a foot pedal, step on the                

               On/Off button.

Operation

Turning on the tree

This tree package includes hinge pins, washers and bulbs for any 

replacement or repair that you need to perform on your tree. If 

extra parts are needed, contact the Customer Service Team at 

1-877-527-0313 between the hours of 8 am and 5 pm EST, Monday 

through Friday.
Repairing Loose Hinges

Step 1.

 Place the branch into the slot of the bracket.

Step 2.

 Insert a new hinge pin through the holes of the bracket 

               and secure with a washer.

Maintenance

Spare parts

LAMP REPLACEMENT

Step 2. Lift up lamp lock tab, then pull the 

               lamp and plastic lamp base straight 

                out of the lamp-holder.

Step 3. Replace with a new spare lamp 

                provided with this product.

(Reference figure only)

Step 1.

 

Grasp the power adapter or power cord plug, and than 

                unplug from the power outlet. Do not pull the power cord.

1. Before using or reusing, inspect product carefully. Discard any 

products that have cut, damaged or frayed  wire insulation or 
cords, cracks in the lampholders or enclosures, loose 
connections, or exposed copper wire.

2. Before disassembling the tree, unplug the tree and remove all 

ornaments and decorations.

3. Gently lift the tree top straight up to remove from the center 

section and fold all branches towards the pole.

4. Repeat this step for the center and bottom tree sections.
5. When storing the product, carefully remove the product from 

wherever it is placed, including tree, branches, or bushes, to 
avoid anyundue strain or stress on the product conductors, 
connections, and wires. Cover the 

    protective cap on the poles to avoid 
    damaging the internal parts.
6. When not in use, store neatly in a cool, 
    dry location protected from sunlight.

Use and Care Instructions

Reviews: