Operation
Turning on the tree
Maintenance
Spare parts
Repairing Loose Hinges
Troubleshooting
Problem Solution
The tree does
not light
Ensure that all tree sections are
plugged into each other and that
the tree is plugged into the wall.
If your tree came with a foot pedal,
step on the On/Off button.
Check for blown fuses at the light
string and power cord plugs.
Replace as needed with the
replacement fuses provided.
Check for loose, broken, or missing
bulbs and replace as needed with
the replacement bulbs provided
NOTE: If some bulbs do not light or flicker, search for any
loose plugs and/or broken, loose, or missing bulbs.
Replace bulbs promptly with the replacement bulbs
provided in order to maintain the performance and life
expectancy of your tree.
Step 1. Connect the light strings of the tree together and
plug the power cord into a wall outlet.
Step 2. If the tree comes with a foot pedal, step on the
On/Off button.
This tree package includes hinge pins, washers, bulbs, and
fuses for any replacement or repair that you need to
perform on your tree. If extra parts are needed, contact the
Customer Service Team at 1-877-527-0313 between the
hours of 8 am and 5 pm EST, Monday through Friday.
Use and Care Instructions
1. Before using or reusing, inspect product carefully.
Discard any products that have cut, damaged or frayed
wire insulation or cords, cracks in the lampholders or
enclosures, loose connections, or exposed copper wire.
2. Before disassembling the tree, unplug the tree and
remove all ornaments and decorations.
3. Gently lift the tree top straight up to remove from the
center section and fold all branches towards the pole.
4. Repeat this step for the center and bottom tree sections.
5. When storing the product, carefully remove the
product from wherever it is placed, including tree,
branches, or bushes, to avoid any
undue strain or stress on the product
conductors, connections, and wires.
Cover the protective cap on the
poles to avoid damaging the internal
parts.
6. When not in use, store neatly in a cool, dry location
protected from sunlight.
Step 1. Place the branch into the slot of the bracket
Step 2. Insert a new hinge pin through the holes of the
bracket and secure with a washer.
Christmas Tree
Model: TGC0P5402C02
Sku # 691 620
a) Grasp plug and remove from the receptacle or other
outlet device. Do not unplug by pulling on cord.
b)Open fuse cover. Slide open fuse access cover on top
of attachment plug towards blades.
c) Remove fuse carefully.
d)Risk of fire. Replace fuse
only with 7 Amp, 125 Volt
fuse for the power cord set.
e)Close fuse cover. Slide closed
the fuse access cover on
top of attachment plug.
f) Risk of fire.Do not replace attachment plug. Contains
a safety device (fuse) that should not be removed.
Discard product if the attachment plug is damaged.
SPARE FUSE
User servicing instructions
Fuse replacement
Section 5
Section 4
Section 3
Section 2
Section 1
Insert
Green Label
Plug Into Wall
Outlet
Foot Pedal
on/off Switch
S100
S100
S100
S100
S50
S100
S100
S50
S100
S100
S50
S100
S50
Do Not Tamper
Internal Parts
Open the
protective
cover
Do Not Tamper
Internal Parts
Open the
protective
cover
