Assembly
Assembling the Owls
Step 1. Align the two Body Halves of Big Owl (B) with each other and fasten together with the
Plastic Ties (K). FIG. 1
Step 2.Stand the Body section in an upright position . Place the Decorative Collar (G) on top of
the Body then Insert the rod of Head of Big Owl (A) into the matching holes on top of the Body
of the Big Owl and fasten together with the Plastic Ties. FIG.1
Step 3. Repeat Steps 1 & 2 above for the Small Owl. FIG. 1
Step 1. Insert the metal rods attached to each Wings of Big Owl (C) into the matching holes on
the Big Owl Body and fasten with the Plastic Ties. FIG. 2
Step 2.Repeat Step 1 above for fastening wings to Small Owl. FIG 2
Step 3. Secure the Owls to the ground with the Ground Stakes (H). FIG.2
Pre-Operation
CAUTION:
Grasp the plug to insert or remove from the power source.
Do not unplug by pulling on cord.
CAUTION:
The lighting string on this product is rated at 7.2 Watts
(0.06Amps). Do not overload. Do not connect to other lighting strings, decorative
outfit or other electrical products. Before you use or re-use this product inspect it
carefully. Return to Store or discard if the product has cuts, damage or frayed wire
insulation on cords, cracks in the socket enclosures, loose connections or exposed
copper wire.
Care and Cleaning
a. Carefully remove the product from wherever it is placed. This helps to avoid any
undue strain or stress on the product, wire and lighting connections. If the product
is placed somewhere other than the ground it should be well secured and stable.
b. Wipe the unit with a damp cloth and allow the unit to dry before storing.
c. Store the product neatly in a cool, dry location protected from sunlight.
FOR INDOOR AND OUTDOOR USE
A
D
B
E
FIG. 1
