ASSEMBLY
1. Assembling the Body
Align the two Halves of Body (B) and insert the connecting rods on one
half into the matching holes on the other half then fasten them together
at the connecting loops with Plastic Ties (O).
2. Assembling the Head and Tail to the Body
Insert the connecting rods on the bottom of the Head (A) and Tail (D) into
the matching holes on the Body and fasten them together at the
connecting loops with Plastic Tie (O).
3. Assembling the Legs to the Body
Insert the connecting rods on the Front Legs (C) into the matching
holes on the front of the Body then fasten with Plastic Ties (O).
4. Assembling the Mailbox Pole Section to the Base Stand
Insert the metal connecting rod at the bottom of the Mail Box Pole Section (I)
into the matching tubes in the center of Square Base Stand (L). Insert the
three metal connecting rods at the bottom the Mail Box (G) into the matching
holes on the top of the Mail Box Pole Section and fasten them together with
Bolt & Wingnut (M).
5. Assembling the Big Gift Box to the Mailbox Box Lid
Insert the connecting rods on the Big Gift Box (F) and the Mailbox Box
Lid (H) into the matching holes on the front of the Mail Box (G). Fasten
with Plastic Ties(O).
6. Assembling the Small Gift Box to the Top of Mailbox
Insert the connecting rods on the Small Gift Box (K) into the connecting
holes at the top of the Mailbox (G). Insert the connecting rods on the Bird
(J) into the connecting holes at the top of Small Gift Box (K). Fasten all with
Plastic Ties (O).
7. Assembling the Front Legs to the Big Gift Box and Scarf
to the Dogs neck
Insert the connecting rods on the Front Legs (C) into the matching
holes on the Big Gift Box (F). Wrap the Scarf (E) around the neck
of the Dog.
8. Securing
the
Mailbox
and Dog to the Ground
Secure the Mailbox and Dog to the ground with the Ground Stake (N). Place
the Ground Stake over the metal frames of Mailbox Base Stand and Dog’s
paws then into the ground.