ASSEMBLY
1 Assembling the Ice Slope
Insert the connecting rods on the upper Half of Ice Slope (M) into the
connecting holes on the lower Half of Ice Slope and fasten at the
connecting loops with the Plastic Ties (R).
2 Securing the Base Stand to the Ice Slope
Insert the top tapered end of the Supporting Pole (N) into the connecting
hole on the back side of the upper Half of Ice Slope (M) and insert the
bottom end of the Supporting Pole into the connecting rod on the Base
Stand (O). Secure with locking pins and fasten at the connecting loops
with the Plastic Ties (R).
3 Assembling the Sled to the Ice Slope
Insert the connecting rods on the Back and Front Halves of Sled (L1 &
L2) into the connecting holes on top of the Ice Slope (M) and fasten at
the connecting loops with the Plastic Ties (R).
4 Assembling the Penguins Body and Hat, Wings & Feet to
the Penguin's Body
Align two Halves of Penguin's Body (B) and insert the connecting rods of
one half into the connecting holes on the other half then fasten at the
connecting loops with Plastic Ties (R). Insert the connecting rods on the
bottom of the Hat (A) into the connecting holes at the top of the Head (B).
Insert the connecting rods on each Wing and Leg (D,E) into the matching
connecting holes on the Body (B). Fasten parts at the connecting loops with
Plastic Ties (R).
5 Assembling the Snowman's Body and Hat, Wings & Feet to
the Snowman's Body
Align the two Halves of Snowman's Body (H) and insert the connecting
rods on one half into the connecting holes on the other half. Insert the
connecting rods on the bottom of the Hat (F) into the connecting holes
at the top of the Head (G). Insert the connecting rods on each Arm and
Leg (I,J) into the connecting holes on the Body of Snowman (H) and
fasten at the connecting loops with the Plastic Ties (R).
6 Assembling the Penguin and Snowman to the Sled
Insert the connecting rods on the backside of the Penguin and Snowman
(C,H) into the matching connecting holes on the top of the Sled (L) and
fasten at the connecting loops with the Plastic Ties (R).
7 Assembling the Scarves to the Penguin and Snowman
Wrap the Scarves (K) around the necks of the Penguin and Snowman.
8 Assembling the Ground Stakes
Insert Ground Stakes (S) over the metal frame on the Base Stand and the
front of the Ice Slope then into the ground firmly.
M
R
N
O
M
R
R
L1
M
R
L2
A
B
E
D
R
B
I
H
R
G
F
H
J
C
R
H
L
K
S