8
B
Attaching the light kit mounting
plate to the mounting ring
□
Remove one of the three light kit mounting plate
screws (EE) from the mounting ring (KK) and loosen
the other two screws (EE). (Do not remove)
□
Place the key holes in the light kit mounting plate (F)
over the two screws (EE) previously loosened from
the mounting ring (KK), and turn the light kit
mounting plate (F) until the light kit mounting plate
(F) locks in place at the narrow section of the key
holes.
□
Securely tighten the two light kit mounting plate
screws (EE) previously loosened and the one (EE)
previously removed.
EE
F
KK
CAUTION:
Before starting installation, disconnect the
power by turning off the circuit breaker or removing the fuse
at the fuse box. Turning power off using the fan switch is not
sufficient to prevent electric shock.
Assembly — Installing the Light Kit
9
Attaching the light kit to
the light kit mounting plate
□
While holding the light kit (G) under the fan, snap
together the wire connection plugs (LL).
□
Carefully push all wires back into the light kit
mounting plate (F). Install the light kit (G) onto the
light kit mounting plate (F) with the three light kit
mounting screws (FF) provided. Be sure to tighten all
screws.
F
FF
G
LL
B
12
