8
Assembly - Hanging the Fan
Attaching the fan to the
electrical box
Hanging the fan
☐
Pass the 120-Volt supply wires through the center hole
in the slide-on mounting bracket (A).
☐
Install the ceiling slide-on mounting bracket (A) on the
outlet box by sliding the slide-on mounting bracket (A)
over the two screws (MM) provided with the outlet box. If
necessary, use leveling washers (not included) between
the slide-on mounting bracket (A) and the outlet box.
Note that the flat side of the slide-on mounting bracket
(A) is toward the outlet box.
☐
Securely tighten the two mounting screws (MM).
☐
Carefully lift the fan-motor assembly (E) up to the slide-
on mounting bracket (A).
☐
Seat the hanger ball portion of the ball/downrod
assembly (B) in the mounting bracket socket. Ensure
that the tab on the slide-on mounting bracket (A) socket
is properly seated in the groove in the hanger ball.
1
2
WARNING:
To reduce the risk of fire, electric shock,
or other personal injury, mount the fan to an outlet
box or supporting system marked “Acceptable for
fan support of 35 lbs. (15.9kg) or less” and use
the mounting screws provided with the outlet box.
NOTE:
The mounting bracket (A) is designed to
slide into place on an outlet box with the outlet box
screws (MM).
A
MM
MM
A
B
C
D
E
