background image

 3 

HOMEDEPOT.COM/HOMEDECORATORS 

 

 

Please contact 1-800-986-3460 for further assistance. 

Specifications

 

 

 

 

Size 

Speed  Volt

Fan Power 

Consumption 

(without 

lights) WATT 

Airflow 

CFM 

Airflow 

Efficiency 

(Higher Is 

Better) 

CFM/WATT 

Net 

Weight 

Gross 

Weight 

Cubic Feet

 21.5 in. 

Low 

120 

23.39 888  37 

16.11 lbs 

(7.31 kgs) 

 27.89 lbs 

(12.65 kgs) 

7.37 cu. ft. 

Med 

31.50 1076 34.15 

High 

39.72 1309 32.75 

 

 

NOTE: 

These are approximate measures. They do not include 

the Amps and Wattage used by the light kit. 

 

 

Warranty 

 

 
The supplier warrants the fan motor to be free from defects in workmanship and material present at time of shipment from the factory for a 
lifetime after the date of purchase by the original purchaser. The supplier also warrants that all other fan parts, excluding any glass or 
acrylic blades, to be free from defects in workmanship and material at the time of shipment from the factory for a period of two years after 
the date of purchase by the original purchaser. We agree to correct such defects without charge or at our option replace with a comparable 
or superior model if the product is returned. To obtain warranty service, you must present a copy of the receipt as proof of purchase. All 
costs of removing and reinstalling the product are your responsibility. Damage to any part such as by accident or misuse or improper 
installation or by affixing any accessories, is not covered by this warranty. Because of varying climatic conditions this warranty does not 
cover any changes in brass finish, including rusting, pitting, corroding, tarnishing, or peeling. Brass finishes of this type give their longest 
useful life when protected from varying weather conditions. A certain amount of “wobble” is normal and should not be considered a defect. 
Servicing performed by unauthorized persons shall render the warranty invalid. There is no other express warranty. Home Decorators 
Collection hereby disclaims any and all warranties, including but not limited to those of merchantability and fitness for a particular purpose 
to the extent permitted by law. The duration of any implied warranty which cannot be disclaimed is limited to the time period as specified in 
the express warranty. Some states do not allow a limitation on how long an implied warranty lasts, so the above limitation may not apply to 
you. The retailer shall not be liable for incidental, consequential, or special damages arising out of or in connection with product use or 
performance except as may otherwise be accorded by law. Some states do not allow the exclusion of incidental or consequential damages, 
so the above exclusion or limitation may not apply to you. This warranty gives specific legal rights, and you may also have other rights 
which vary from state to state. This warranty supersedes all prior warranties. Shipping costs for any return of product as part of a claim on 
the warranty must be paid by the customer. 
 
Contact the Customer Service Team at 1-800-986-3460 or visit www.HomeDepot.com/homedecorators. 
 

 

Pre-Installation  

 

 

PLANNING INSTALLATION 

Before beginning installation, make sure all parts are included using the Hardware Included and Package Contents sections. If any part is 
missing or damaged, do not attempt to assemble, install, or operate the product. 
 
To avoid damaging this product, place it on a soft, non-abrasive surface, such as carpet or cardboard. 

 

 

Summary of Contents for 1004 552 791





































Reviews: