12
Assembly - Attaching the Light Kit
Attaching the light kit fitter assembly
2
□
Remove one screw (LL) from the light kit pan (G), and loosen, but
do not remove, the other two screws.
□
Connect the wires from the light kit fitter assembly (H) to the
wires from the fan motor assembly (E) by connecting the molded
adaptor plugs together. Carefully tuck all wires and splices into
the switch cup.
□
Push the light kit fitter assembly (H) up to the light kit pan (G) so
that the two loosened screw heads fit into the keyhole slots. Turn
the light kit fitter assembly (H) clockwise to secure.
□
Re-install the screw that was removed in the first step.
□
Make sure all the screws are firmly tightened.
Installing the light kit pan
1
□
Remove one screw (KK) from the black bracket below the fan
motor assembly (E), and loosen but do not remove the other
two screws.
□
Push the light kit pan (G) up to the fan motor assembly (E) so
that the two loosened screw heads fit into the keyhole slots.
Turn the light kit pan (G) clockwise.
□
Re-install the screw (KK) that was removed in the first step.
□
Make sure all the screws are firmly tightened.
KK
G
E
H
LL
E
G
