Home Decorators Collection 1005 832 077, Use And Care Manual

7

Assembly — Hanging the Fan

□

Loosen the two 

fan motor assembly coupling set screws 

(JJ) from the fan motor assembly (J) coupling.  

□

□

Remove the hitch pin (GG) and lock pin (HH) from the 
downrod (G). Remove the hanger ball (F) from the 
downrod (G) by loosening the hanger ball set screw 
(II), and removing the cross pin (FF), then sliding 
the hanger ball (F) off of the downrod (G).    

Attaching the downrod to the 
fan motor assembly  

2

Carefully feed the fan wires up through the downrod (G). 
Thread the downrod (G) into the fan motor assembly (J) 
coupling. Line up the holes and replace the lock pin (HH) 
and the hitch pin (GG). Tighten the set screws (JJ).

1

Attaching the mounting bracket to
the electrical box

□

Secure the 

mounting bracket

 (C) to the ceiling outlet box 

with the screws and washers provided with your outlet 
box.  

WARNING:

C

FF

F

G

II

HH

GG

JJ

J

Please contact 1-844-400-FANS (3267) for further assistance.

HOMEDEPOT.COM/HOMEDECORATORS

                       To reduce the risk of fire, electric shock, or 
other personal injury, mount the fan only to an outlet box or 
supporting system marked acceptable for fan support and 
use the mounting screws provided with the outlet box.