12
Assembly - Installing the Switch Cup
□
Remove one screw (TT) from the black bracket below the fan
motor assembly (E) and loosen, but do not remove the other
two screws.
□
Push the switch cup (H) up to the fan motor assembly (E) so
the two loosened screw heads fit into the keyhole slots. Turn
the switch cup (H) clockwise to secure.
□
Re-install the screw (TT) that was removed in step 1.
□
Make sure all the screws are firmly tightened.
Installing the switch cup
1
E
TT
H
Attaching the light kit fitter assembly
1
CAUTION:
To reduce the risk of electric shock, disconnect
the electrical supply circuit to the fan before installing the
light fixture.
NOTE:
This light kit cannot be transferred to another fan.
Assembly - Attaching the Lights
□
Remove the three screws (OO) on the switch cup cover of
the light kit fitter assembly (I).
□
Connect the wires from the light kit fitter assembly (I) to
the wires from the switch cup by connecting the molded
adaptor plugs together (blue to black, white to white).
Carefully tuck all wires and splices into the switch cup.
□
Align the three holes in the switch cup cover of the light kit
fitter assembly (I) with the three holes in the switch cup.
□
Re-install the three screws (OO) that were removed in first
step to secure the light kit fitter assembly (I).
I
OO
H
