11
HOMEDEPOT.COM/HOMEDECORATORS
Please contact 1-800-986-3460 for further assistance.
Assembly - Attaching the Blades
Attaching the fan blades
1
□
Attach one of the longer blades (F) to the fan-motor housing (E)
by inserting the blade (F) into slots in the side of the fan motor
housing (E) and aligning the three screws holes in the blade
with the holes in the center flywheel and secure with screws
(AA).
□
Repeat this step for the two remaining longer blades (F).
□
Attach one of the shorter blades (G) to the fan-motor housing (E)
by inserting the blade (G) into slots in the side of the fan motor
housing (E) and aligning the three screws holes in the blade with
the holes in the center flywheel and secure with screws (AA).
□
Repeat this step for the two remaining shorter blades (G).
□
Make sure all the screws are firmly tightened.
Assembly - Hanging the Fan (continued)
Mounting the fan-motor assembly
(standard mount)
□
Align the locking slots of the canopy (C) with the two
screws (CC) and alignment post (KK) in the mounting
bracket (A).
□
Push up the canopy (C) and turn clockwise until the
alignment post (KK) engage to the round hole and the
screws (CC) engage to the key slots.
□
Firmly tighten the two mounting screws (CC).
□
Install the decorative bottom cover (DD) by align-
ing the cover slots with screws in the bottom of the
canopy (C). Rotate the bottom cover (DD) clockwise to
lock in place.
7
WARNING:
When using the standard ball/downrod mounting,
the tab in the ring at the bottom of the mounting bracket
must rest in the groove of the hanger ball. Failure to properly
seat the tab in the groove could cause damage to the wiring.
C
A
CC
D
B
E
KK
F
E
AA
G
E
AA
