Home Decorators Collection 56052, Use And Care Manual

11

HOMEDEPOT.COM/HUBSPACE

Please contact 1-877-592-5233 for further assistance.

Wiring the fan to the receiver

6

□

If using the 6 in. ball downrod assembly (B) provided, wire the 
receiver to the fan wires by connecting the molded adaptor 
plug from the receiver (J) with the molded adaptor of the fan 
motor assembly (E) together.

□

If you wish to use longer downrod, you can use the extension 
lead wire (66 in.) (L) and (M) provided by connecting the 
molded adaptor together.

Assembly - Hanging the Fan (continued)

NOTE:

 The fan comes with 12 in. lead wires for use with 

the provided 6 in. ball downrod assembly (B). If you wish 
to use a longer downrod, attach the 3-pin extension wire 
(L) and 2-pin extension wire (M) to the fan by connecting 
the molded adaptor plugs from the extension wires to 
the 3-pin and 2-pin adaptor plugs from the fan.

Mounting the fan-motor assembly 
(standard mount)

7

WARNING:

 When using the standard ball/downrod 

mounting, the tab in the ring at the bottom of the 
mounting bracket must rest in the groove of the 
hanger ball. Failure to properly seat the tab in the 
groove could cause damage to the wiring.

NOTE:

 The magnet is pre-attached on the canopy bottom 

cover for you to remove and install easily.

□

Align the locking slots of the canopy (C) with the two screws 
(EE) and alignment post (QQ) in the mounting bracket (A).

□

Push up the canopy (C) and turn it clockwise until the alignment 
post (QQ) engages to the round hole and the screws (EE) engage 
to the key slots.

□

Firmly tighten the two mounting screws (EE).

□

Align the oval shape on the canopy (C) with canopy bottom 
cover (JJ), Push up the canopy bottom cover (JJ) until the screw 
(EE) heads engage to the slots on the canopy bottom cover (JJ) 
so that the magnetic canopy bottom cover (JJ) can be attached 
to the bottom of the canopy (C) properly.

Outlet box

in the ceiling

(MM)

Green

L

M

NOTE:

 For better performance with the WIFI system, the 

WIFI antenna must be mounted to the ceiling outside of 
the fan’s ceiling canopy.

QQ

A

B

E

C

JJ

EE

View after installation

WiFi antenna mount

outside of the canopy