10
Disassembling Your Fan
This fan comes with a pre-assembled rear guard (C), blade (D), and
front guard (E) for your easy installation. Check that all screws are
tight and securely in place.
If you need to disassemble the fan for any reason such as
cleaning, follow these steps below:
□
Loosen the front guard screws (DD) to disassemble the front
guard (E) from the rear guard (C).
□
Remove the blade cover (FF) from the blade (D) by turning the
blade cover (FF) clockwise.
□
Loosen the setscrew at the top of the blade head (D) by using
the hex wrench (EE).
□
Remove the blade (D) from the motor shaft.
□
Remove the rear guard (C) from the motor head (A) by loosing
the rear guard screws (CC) from the motor head (A).
D
C
EE
A
E
FF
CC
DD
