11
HOMEDEPOT.COM/HOMEDECORATORS
Please contact 1-800-986-3460 for further assistance.
Assembly - Attaching the Blades
Attaching the post
1
Attaching the blades
2
E
F
AA
□
Attach a blade (F) to the fan motor assembly (E) by aligning the
three screws holes in the blade with the holes in the center
flywheel and secure with screws (AA).
□
Make sure all the screws are firmly tightened.
□
Repeat these steps for the remaining blades.
□
Remove the finial (RR) and rubber pad (NN) from the post (G).
□
Attach the post (G) to the center hole of motor assembly (E) and
turn it clockwise until it is tight.
NN
RR
G
E
G
Assembly - Attaching the Fan Assembly
Attaching the fan assembly
1
□
Attach the decorative cap (NN) and the pad (I) through the
center of post (G), then install the finial (RR) over the threaded
nipple and tighten the finial (RR) securely.
G
H
NN
RR
E
