15
HOMEDEPOT.COM/HOMEDECORATORS
Please contact 1-800-986-3460 for further assistance.
Operating Your Fan
Your fan is equipped with a remote control to operate the fan speed
and lights of your new ceiling fan.
The appropriate speed settings for warm or cool weather depends on
factors such as the room size, ceiling height, and number of fans.
The fan is shipped from the factory with the reversing switch
positioned to circulate air downward. If airflow is desired in the
opposite direction, turn your fan off and wait for the blades to stop
turning, then slide the reversing switch (XX) (located in switch cup) to
the opposite position, and turn the fan on again. The fan blades will
turn in the opposite direction and reverse airflow.
Warm weather
- (Forward) A downward airflow creates a cooling effect.
This allows you to set your air conditioner on a warmer setting without
affecting your comfort.
Cool weather
- (Reverse) An upward airflow moves warm air off of the
ceiling. This allows you to set your heating unit on a lower setting
without affecting your comfort.
A. Warm weather
B. Cool weather
NOTE:
Wait for the fan to stop before reversing the direction of
the blade rotation.
USING THE REMOTE CONTROL
□
Press the desired button on the remote control (J) to operate
the fan:
□
“1” button: Press to turn the fan on and set the fan
speed to low.
□
“2” button: Press to turn the fan on and set the fan
speed to medium.
□
“3” button: Press to turn the fan on and set the fan
speed to high.
□
Power button: Press to turn the fan off.
□
Light button: Press and release immediately to turn the
light on or off. Press and hold to dim or brighten the
bulbs to the desired level and then release (the dimmer
function is for Tungsten bulbs only).
K
Power OFF
Light ON/OFF
& Dimmer Function
ON/High
ON/Medium
ON/Low
