background image

3

HOMEDEPOT.COM/HOMEDECORATORS

Please contact 1-800-986-3460 for further assistance.

Pre-Installation

Warranty

The supplier warrants the fan motor to be free from defects in workmanship and material present at time of shipment from the factory for a 
lifetime after the date of purchase by the original purchaser. The supplier also warrants that all other fan parts, excluding any glass or acrylic 
blades, to be free from defects in workmanship and material at the time of shipment from the factory for a period of two years after the date 
of purchase by the original purchaser. We agree to correct such defects without charge or at our option replace with a comparable or superior 
model if the product is returned. To obtain warranty service, you must present a copy of the receipt as proof of purchase. All costs of removing 
and reinstalling the product are your responsibility. Damage to any part such as by accident, misuse, improper installation, or by affixing any 
accessories, is not covered by this warranty. Because of varying climatic conditions this warranty does not cover any changes in brass finish, 
including rusting, pitting, corroding, tarnishing, or peeling. Brass finishes of this type give their longest useful life when protected from varying 
weather conditions. A certain amount of “wobble” is normal and should not be considered a defect. Servicing performed by unauthorized persons 
shall render the warranty invalid. There is no other express warranty. Home Decorators Collection hereby disclaims any and all warranties, 
including but not limited to those of merchantability and fitness for a particular purpose to the extent permitted by law. The duration of any 
implied warranty which cannot be disclaimed is limited to the time period as specified in the express warranty. Some states do not allow a 
limitation on how long an implied warranty lasts, so the above limitation may not apply to you. The retailer shall not be liable for incidental, 
consequential, or special damages arising out of or in connection with product use or performance except as may otherwise be accorded by 
law. Some states do not allow the exclusion of incidental or consequential damages, so the above exclusion or limitation may not apply to you. 
This warranty gives specific legal rights, and you may also have other rights which vary from state to state. This warranty supersedes all prior 
warranties. Shipping costs for any return of product as part of a claim on the warranty must be paid by the customer.

Contact the Customer Service Team at 1-800-986-3460 or visit www.HomeDepot.com/homedecorators.

SPECIFICATIONS

TOOLS REQUIRED

NOTE:

 These are approximate measures. They do not

include the Amps and Wattage used by the light kit.

Phillips 
screwdriver

Flat blade 
screwdriver

Adjustable 
wrench

Electrical 
tape

Wire 
cutter

Step ladder

Size

Speed

Volts

Amps

Watts

RPM

CFM

Net

Weight

Gross

Weight

Cube Feet

52 in.

Low

Medium

High

120

0.26

0.39

0.56

15

33

67

70

110

165

2341

3921

5740

xx.x lbs. 

(x.x kg)

xx.xx lbs.

(xx.x kg)

x.xx cu.ft.

Summary of Contents for HALLMAN 51759


















Reviews: