HOMEDEPOT.COM/HOMEDECORATORS
Please contact 1-800-986-3460 for further assistance.
5
Installation
1
Preparing the fixture and installing
the mounting plate
□
□
□
□
□
□
Carefully unpack the fixture and lay out all parts on a clean
surface.
Turn off the switch at the wall and turn the power off at the
main fuse box.
Unscrew the socket ring (G) from the socket (E).
Position the backplate (A) on the wall at the desired
location and mark the wood screw (CC) locations.
Drill 6 mm (1/4”) pilot holes on the marked spots and insert
plastic anchors (AA). (If fastening with wood screws (CC) to
studs, skip this step.)
Attach the mounting plate (BB) to the wall with two wood
screws (CC). Make sure the mounting bracket (EE) is facing
up and down as shown.
□
Raise the backplate (A) to the wall, insert the mounting bracket (EE)
into the slot in the backplate (A), and then secure the backplate (A)
to the wall with the small screw (DD).
2
Hanging the lamp
DANGER:
Ensure the power is off at the main fuse box
prior to beginning installation.
AA
C
A
D
DD
EE
A
E
G
BB
EE
CC
