PArTS INCLUDED For ASSEMbLY (parts are not to scale):
ASSEMbLY INSTrUCTIoNS:
1.
Shut off power at the fuse box or circuit breaker box, if necessary remove
old fixture and all mounting hardware from outlet box.
2. Carefully unpack your new fixture and lay out all the parts on a clear area,
take care not to lose any small parts necessary for installation.
3. Determine the desired height and screw the bottom end of Center Tube (#2)
onto the protruding nipple at the top center of Fixture Body (#1) until snug.
Repeat this step for the remaining Center Tube (#2) if necessary.
4. Screw the bottom of the Canopy (#3) onto the top of Center Tube (#2) until
Snug.
5.
Install the bulb (not included) to the socket in accordance with the specifications
on fixture
(Do NoT EXCEED THE MAXIMUM WATTAGE rATING)
.
4 Center Tube (#2)
1 Canopy (#3)
Page 4
