button: The button is used to set the fan
speed as follows:
= Turns the fan off, 1 = High Speed, 2 =
Medium High Speed, 3 = Medium Speed, and
4 = Low Speed.
“ ” button: The button will turn the light on
and off and will also control the light bright-
ness. Slide the button to set the desired light
brightness.
1.
2.
Restore power to the ceiling fan, and test for
proper operation.
Figure 20
Operating Your Transmitter
Figure 21
Figure 22
Warm weather
- (Counter-Clockwise direction)
A downward air flow creates a cooling effect.(Fig.
21) This allows you to set your air conditioner on
a higher setting without affecting your comfort.
Cool weather
- (Clockwise direction) An upward
airflow moves warm air off the ceiling area. (Fig.
22) This allows you to set your heating unit on a
lower setting without affecting your comfort.
NOTE
WAIT FOR FAN TO STOP BEFORE REVERSING
THE DIRECTION OF THE BLADE ROTATION.
The reverse switch is located on the surface of the
coupling cover. This switch controls directions:
forward (switch down) or reverse (switch up).
1
2
3
4
12
