12
Assembly - Attaching the Fan Blades
Assembly - Installing the Light Kit
Attaching the light kit pan
Attaching the fan blades
10
9
□
Remove one screws (RR) from the black bracket below
the fan motor assembly (D). Loosen but do not remove the
other two screws.
□
Connect the 9-pin plug exiting the bottom of the fan motor
to the 9-pin plug from the light kit pan (E). Be sure plugs
connection snap together completely.
□
Attach the light kit pan (E) to the fan motor assembly (D) by
securing with the two screws (RR) loosened in first step.
Push the light kit pan (E) up to engage the screw heads
in the screw slots and turn to secure. Tighten each screw
firmly.
□
Attach a blade (G) to the fan motor housing (D) by inserting
the blade (G) into the slot in the side of the fan motor
housing (D) until it stops. The locking clip will click twice
when the blade is correctly installed. Ensure the blade is
snapped into locking clip (QQ) completely by pulling the fan
blade away from the motor housing.
□
Repeat these steps for the remaining blades (G).
G
C
D
CAUTION:
To reduce the risk of electric shock, disconnect
the electrical supply circuit to the fan before installing the
light kit.
E
G
D
RR
Attaching the light kit fitter assembly
11
□
To attach the light kit fitter assembly (H), remove one
screw (SS) from the light kit pan (E), and loosen, but do not
remove the other two screws.
□
Connect the blue wire exiting the bottom of the fan motor
assembly (D) with the black wire from the top of the light
kit fitter assembly (H).
□
Connect the white wire exiting the bottom of the fan motor
assembly (D) with the white wire from the top of the light
kit fitter assembly (H).
□
Push the light kit fitter assembly (H) up to the light kit
pan (E) so that the two loosened screws heads fit into
the keyhole slots. Turn the light kit fitter assembly (H) to
secure. Tighten each screw firmly.
CAUTION:
To reduce the risk of electric shock, disconnect
the electrical supply circuit to the fan before installing the
light kit.
E
G
D
H
SS
