Item #0000 000 000
Model #EFG8195L-2
Care and Cleaning
□
Clean the fixture with a soft, dry cloth.
□
Do not use any cleaners with chemicals, solvents or hash abrasives.
WARNING:
Before attempting to clean the fixture, disconnect the power to the fixture by turning the breaker off or
removing the fuse from the fuse box.
Installation (continued)
6
Attaching the globe and tighten the finial
□
Place the sleeve (FF), the metal washer (GG),
the plastic washer (HH), and the globe (J) over
the nipple (I).
□
Screw the gasket (II) onto the
nipple (I) to secure the globe (J).
□
Place the cover (JJ) over the nipple (I).
□
Screw the finial (KK) onto the nipple (I)
Troubleshooting
Problem
Possible Cause
Solution
The fixture will not illuminate.
The power is off.
Ensure the power supply is On.
The circuit breaker is
off.
Ensure the circuit breaker is in the On position.
The fuse blows or circuit
breaker trips when the fixture
is illuminated.
The wires are crossed
or the power wire is
grounding out.
Check the wire connections.
