ITEM # ACNS18V BRAD NAILER/STAPLER
12
If the fasteners remain jammed after following the above instructions, slightly loosen the four hex
screws upon the nosepiece with the wrench provided,take off the nose cover then remove the
jammed fasteners pieces
Remove the jammed nail with pliers if necessary. After the jammed nail has been successfully
removed , then re-tighten the nose piece with hex screws securely.
Keep opening the magazine, insert in the battery to shot two or three times . .
Then reload in the staples/nails, close the magazine to shot , will be ok
Do not dispose of power tools into household waste !
Recycle unwanted materials instead of disposing them as waste.