Home Depot B552QI-BN, Use And Care Manual

Assembly — Attaching the Fan Blades

8

Removing the rubber 
packing mounts

9

Attaching the blades to 
the blade arms

□

     The fan motor assembly (F) is shipped with rubber 

packing mounts (PP) to prevent movement during 
transportation. Remove the five rubber packing 
mounts (PP) from the fan motor assembly and 
discard prior to attaching the blade arms.

□

     Using the screws already installed on the blade arms 

(I), attach the blade arm support plate (G) and blades 
(H) to the blade arms (I). Slide the screws on the 
blade arms (I) to the narrow portion of the key hole 
slot on the blade arm support plate (G), by pushing 
the tab (QQ) back until the rectangle plastic band (RR) 
falls into the hole on the blade (this locks the blade 
assembly). 

□

     To remove the blade (H) from the blade arm (I), pull 

the rectangle plastic band (RR) up and slide the 
screws toward the wide portion of the key hole slot 
on the blade support plate (G). This will loosen the 
blade (H) and blade arm support plate (G) and will 
allow you to remove the blade (H) from the blade arm 
(I).

14

F

PP

NOTE:

Your fan blades are reversible. Select the blade side 

finish which best accentuates your decor.

G

H

I

QQ

RR